Colonized beads as inoculum for marine biodegradability assessment: Application to Linear Alkylbenzene Sulfonate

An innovative biodegradation test system was developed in order to fill the current gap for cost effective and environmentally relevant tools to assess marine biodegradability. Glass beads were colonized by a biofilm in an open flow-through system of seawater with continuous pre-exposure to Linear Alkylbenzene Sulfonate (LAS) (20 μg/L). Thereafter, such colonized beads were added as inoculum in different test systems. [¹⁴C]-LAS (5–100 μg/L) was added and primary and ultimate biodegradation were assessed. The bacterial density collected on the beads (10⁹ bact./mL beads) was ca. 3 orders of magnitude higher than the typical seawater content. The LAS mineralization lag phase duration decreased from 55 to < 1 days and the mineralization extent increased from 53 to 90% as the colonized beads volume increased from 10 to 275 mL. This is the first demonstration of marine bacteria's ability to mineralize LAS. On the opposite, less than 13% LAS was mineralized in seawater only. The colonized beads possibly enhanced the probability to encounter the full degraders' consortium in a low volume of seawater (100 mL).     

The CO2 abatement cost curve for the Thailand cement industry

The cement industry is one of the largest carbon dioxide (CO₂) emitters in the Thai industry. The cement sector accounted for about 20,633 kilotonnes (ktonnes) CO₂ emissions in 2005 in Thailand. A bottom-up CO₂ abatement cost curve (ACC) is constructed in this study for the Thai cement industry to determine the potentials and costs of CO₂ abatement, taking into account the costs and CO₂ abatement of different technologies. The period of 2010–2025 is chosen as the scenario period. We analyzed 41 CO₂ abatement technologies and measures for the cement industry. Using the bottom-up CO₂ ACC model, the cost-effective annual CO₂ abatement potential for the Thai cement industry during the 15 year scenario period (2010–2025) is equal to 3095 ktonnes CO₂/year. This is about 15% of the Thai cement industry’s total CO₂ emissions in 2005. The total technical annual CO₂ abatement potential is 3143 ktonnes CO₂/year, which is about 15.2% of the Thai cement industry’s total CO₂ emissions in 2005. We also conducted a sensitivity analysis for the discount rate parameter.     

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010

Environmental Geochemistry and Health - There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in...     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

Green Synthesis and Characterization of Silver Nanoparticles Using Elaeagnus angustifolia Bark Extract and Study of Its Antibacterial Effect

Journal of Polymers and the Environment - Nowadays, many chemical methods have been proposed for the synthesis of silver nanoparticles, but green synthesis has received more attention due to its...     

Applying machine learning approach in recycling

Journal of Material Cycles and Waste Management - Waste generation has been increasing drastically based on the world’s population and economic growth. This has significantly affected human...     

Geochemical fractionation and spectroscopic fingerprinting for evaluation of the environmental transformation of potentially toxic metal(oid)s in surface–subsurface soils

Environmental Geochemistry and Health - The contamination of soil by toxic metal(oid)s has emerged as a major concern worldwide, particularly in developing countries. A metals behavior in the soil...     

Heavy metals distribution and risk assessment in soils affected by tannery effluents

Effluents collected from tanneries in Sialkot showed considerably higher levels of heavy metals. Sodium (12 660.91 mg/L) among macronutrients and Cr (592.20 mg/L) among heavy metals were found in the highest concentrations. Effluent parameters, i.e. biological oxygen demand (BOD; 12.40), chemical oxygen demand (COD; 16.53), Cd (5.90), Cr (592.20) and Fe (18.59) were the respective times higher than Pakistan National Environmental Quality Standards and their continuous unchecked discharge into agricultural soils poses a potential risk. Mean concentrations (mg/L) of Cr (592.20), Ni (2.66), Mn (1.16), Fe (37.17), Zn (0.90), Cd (0.59) and Pb (1.18) in this study exceeded levels recorded to date from different tanning hubs in Pakistan. Factor analysis/principal components analysis (FA/PCA) for the effluent parameters resulted in six varimax factors, i.e. VF1 (salinity, electrical conductivity, total dissolved solids, chloride, phosphate, BOD and COD; including characteristic tannery effluent features), VF2 (pH, Cr and alkalinity; tanning operations), VF3 (Cd and Pb; dyeing processes), VF4 (Mn and Fe; finishing operations), VF5 (Ni; retaining processes) and VF6 (hardness, Ca and Cu; bating processes). Cluster analysis performed on metal data resulted in three clusters confirming metal–metal relations obtained either from FA/PCA or a correlation matrix. The results of this study are useful for heavy metal source apportionment, assessment of risk to peripheral soils and the future management of environments around tanneries.     

Sol-gel immobilisation of methyl parathion degrading bacteria isolated from agricultural areas of Pakistan

The following areas are discussed in this paper: immobilisation of bacterial consortium in sol-gel; methyl parathion degradation and bioremediation applications; evaluation of indigenous bacterial isolates of contaminated soils. Bacterial strains were isolated from agricultural areas of Pakistan which were contaminated with methyl parathion. A bacterial consortium of seven (out of 64) Enterobacteriaceae isolates including Citrobacter, Enterobacter and Proteus vulgaris capable of degrading methyl parathion (enzyme activity ranging 410–675 mU mL^?1 for individual isolates and 982 mU/mL for consortium) was selected and subsequently immobilised in tetraethyl orthosilicate (TEOS) and sodium-silicate-based sol-gel matrices. Cell viability of suspended and immobilised bacterial consortium was monitored using a minimal salt medium supplemented with methyl parathion. The results indicate that sol-gel immobilisation can be helpful to increase the shelf life of methyl parathion degrading bacterial strains along with preservation of biological activity for bioremediation applications in field.